In a perfect world, all four tires would wear out at the same time. In the same perfect world, everyone would be able to afford a whole set of tires all at once. Unfortunately, things often just do not work out that way.

Mixing Tires

Sometimes you may just have to replace tires as you can afford them, one or two at a time, but there are some important things to bear in mind if you have to do that.

If you can only afford to replace one or two tires, it’s essential that you go with tires that are identical (or at least as close as possible) to the car’s remaining tires. That means that internal construction, size, tread pattern and design should be close to the same. Don’t mix winter tires with all-season tires, don’t mix run-flat tires with standard tires, for instance. But why?

Tires are all designed for different handling properties and traction, and are intended to work together as a set. Mixing sizes, tread patterns and designs can mean a car that has unpredictable, jittery, “squirrelly” handling, braking and roadholding properties, and that can be downright dangerous in a panic stop or other emergency situation.

If you have to replace a pair of tires and decide on the same brand and model as the others, the new tires should go on the rear. That might seem counterintuitive to some, but consider this; if you mount the new tires on the front and end up on wet pavement, the new tires will easily disperse the water while the rear tires can hydroplane.

Remember that the minimum tread depth for tires, by state law, is 2/32”. At 2/32”, you should be able to plainly see the wear bars that are molded at a right angle in the base of the tread grooves. If you’re in doubt, insert a penny into the tread grooves, Lincoln head down. If the tread reaches the top of Lincoln’s head, your tread is 2/32” deep. Try again with a quarter – does the tread reach the top of Washington’s head? That’s a depth of 4/32”. One more time with a penny…if the tread reaches the Lincoln Memorial, your tread is 6/32” deep.

If you’re thinking it might be time for a set of tires, don’t put it off… make an appointment and see what kind of price we can make you on a set of premium-brand tires.

Schedule a zero-commitment appointment
to get the help you need, fast.

Vehicle Tips

7 Signs of a Failing Engine

7 Signs of a Failing Engine

Engine failure, especially out of the blue, can be scary. It can put a wrench in your plans if driving somewhere important and depending on the problem, can be expensive to fix. Thankfully, there are lots of warning signs that can signal you when your engine is about to fail.

Read
How to Replace Your Vehicle’s Outer Tie Rod Ends

How to Replace Your Vehicle’s Outer Tie Rod Ends

The outer tie rod ends are one of the more important parts of your vehicle’s steering system. While you may not choose to replace the outer tie rod ends yourself, it is good to be able to recognize what they are and see if they need replacing.

Read
Why do tires go flat in cold weather?

Why do tires go flat in cold weather?

Have you noticed an increase in flat tires during the frigid winter months? There’s a reason for it. Keep reading for some simple explanations as to why tires seem to go flat when temperatures drop.

Read
What to Do (and Not Do) When Your Brakes Fail

What to Do (and Not Do) When Your Brakes Fail

When your vehicle is functioning properly, it’s easy to forget how dangerous driving can be. However, it only takes a moment for an important component to malfunction. Suddenly your car has your full attention. One of the worst situations to find yourself in as a driver is to press the brake pedal only to realize that it is not working.

Read